Fred:
With Fury 2000 miles away and the linear drive buried deep in the stern of the boat, I am not sure how I would get the model number. Are there physical differences that would obvious looking at it? For example would the ram be larger for the type 2? My fluxgate compass connects to the brain. I then connected my I 70 instruments to the Seatalk out put at the brain to get heading info. That Seatalk info connects to a converter to Seatalk ng. Fred S/V Fury From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street Sent: Saturday, November 30, 2013 4:16 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Autohelm Auto pilot Fred - can you get me the model number of the linear drive in your boat (I'm assuming it's linear.)? Specs on the website show the displacement of the C&C44 at 20,000 lbs; the drive you've got will determine whether you'll need the Raymarine ACU-200 or ACU-400 course computer. The Type 1 drives (which would require the ACU-200) are generally rated to 24,000 lbs displacement, which is right on the edge for your boat; if you have a Type 2, you'll need the more powerful ACU-400 to drive it. The control head in either case will be the p70; that and the heading sensor connect to the ACU via SeaTalkNG (Raymarine's NMEA2000 variant), so some SeaTalk cabling will be needed. You should be able to reuse the cabling you have now between the course computer and the drive, as well as the power supply from the breaker panel to the course computer. You'll need to change the cabling between the computer and the control head, and extend that SeatalkNG bus to the heading sensor. Overall, it would be a pretty simple change-out. Does your autopilot system currently connect to any other instruments via SeaTalk? I'll try to get you contact info on the repair guy next week. - Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Nov 30, 2013, at 5:23 PM, Fred Hazzard <fredhazz...@spiritone.com> wrote: Fred, Thanks your offers of help with the auto pilot. Please send me price to replace with newer brain and control head. I would also appreciate any info you can give about how to hook up the old parts to the new unit. I would also like to speak with the Colorado man about possible repairs. Thanks Fred Hazzard
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
