I use one of the larger Pela vacuum extractors. My opinion, don't buy the
smaller one. At some point you will need the larger size.
I keep one of the hand pumps on board along with enough oil and filters to do
an oil change underway if need be. I usually have a couple of gallon water
jugs aboard for the used oil.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: Jim Watts <paradigmat...@gmail.com>
>To: 1 CnC List <cnc-list@cnc-list.com>
>Sent: Tuesday, November 26, 2013 10:57 AM
>Subject: Re: Stus-List Oil Extractor Pump recommendations for Yanmar 2GM20F?
>
>
>
>From bitter experience:
>
>1. The brass hand pumps get really hot when your oil is warm enough to
>transfer, are difficult to position in the sump unless you have a helper, and
>sometimes ooze oil out the end caps. I used to use an oven mitt with mine
>until I started using a vacuum extractor.
>
>2. The vacuum extractors work really well. Get one that's marked so you can
>see how much oil has come out. I currently have a metal one that will probably
>last forever, but I can't tell how much oil is in there. This can have major
>implications when it comes time to fill up the engine with new oil. The Pella
>ones are much cheaper than the Moeller ones, plus you can size it
>appropriately to your engine. No point having a giant pump if you only have 2
>liters of oil.
>
>
>
>
>On 26 November 2013 05:02, Harry Hallgring <hhallgr...@icloud.com> wrote:
>
>I just bought the less expensive Jabsco electric pump and pail. A little slow,
>but got the job done just fine. About $134 online.
>>
>>Harry
>>Mirage
>>
>>_______________________________________________
>>This List is provided by the C&C Photo Album
>>http://www.cncphotoalbum.com
>>CnC-List@cnc-list.com
>>
>
>
>--
>Jim Watts
>Paradigm Shift
>C&C 35 Mk III
>Victoria, BC
>
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
