Here is the one I use on my 2GM20F it works real well. Its still a bit hard to get all the oil out. It helps to prime the pump. Cheers and good luck
http://www.go2marine.com/product/52018F/jabsco-utility-hand-pump-marine-engine-oil-drain-self-priming-brass-piston-type.html On 11/25/13, Kevin Driscoll <kevindrisc...@gmail.com> wrote: > Thanks to everyone who chimed in with recommendations and well wishes on > our new ownership of a C&C 30-2. > > Sunday I tried my hand at an oil change, but a borrowed oil pump from > another skipper wouldn't cut it because the hose that inserts into dipstick > hole on my Yanmar 2GM20F was too large. I haven't measured the hole, but it > is quite small. > > Could anyone recommend an oil extractor pump that will work / fit the > 2GM20F? > > Does anyone know of a C&C owners group in Oregon, or "One Design" > rendezvous / race? I heard rumor there may be one. > > Thanks again, > Kevin > C&C 30 - 2 "Osprey" > > Sent from a mobile device. > -- “Sailors, with their built in sense of order, service and discipline, should really be running the world.” - Nicholas Monsarrat _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
