Don't know the model of the Volvo engine in a fellow Club members Swan, but
he found that a replacement for a suspected faulty thermostat was not
available in the USA!  Caused him to miss the Club Cruise.

 

  _____  

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
Sent: Monday, October 07, 2013 7:33 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Volvo Diesel - opinions?

 

Water pump for Universal - ~$200
Water pump for Volvo - $600++
Starter for Volvo - $600++

In other words, take $$ for Universal or Yanmar part and multiply by 2 or 3
to get Volvo part price.

I'm assuming the 331 has a newer Volvo.  If it's an older Volvo, it's an
anchor.

My opinion, look at a Catalina 309.  Much nicer boat. 

Dennis C.
Touche' 35-1 #83
Mandeville, LA

 

 


  _____  


From: "honeys...@aol.com" <honeys...@aol.com>
To: cnc-list@cnc-list.com 
Sent: Monday, October 7, 2013 5:16 PM
Subject: Re: Stus-List Volvo Diesel - opinions?

 

The parts for the Volvo diesel are VERY, VERY expensive for such a cheap
engine. I agree with the below assessment that the B 331 is indeed a pig to
sail IMHO is just a over blown Bayliner with a fancy name. This is not an
example of the finer Beneteau boats.

 

Jack

C&C 39 TM

 

In a message dated 10/7/2013 6:12:11 P.M. Eastern Daylight Time,
charliekilo...@gmail.com writes:

Don't know about the Volvo diesel, but the B331 is a pig under sail.

Make sure you get a good sea trial so you know what you're getting
into before you lay down a bunch of dough.

My $0.02

Cheers
Colin


On 10/7/13, Steve Thomas <sthom...@sympatico.ca> wrote:
> Good engines, parts are very expensive.
>
> Steve Thomas
> C&C27 MKIII
>
> -----Original Message-----
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Marek
> Fluder
> Sent: Monday, October 07, 2013 3:49 PM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Volvo Diesel - opinions?
>
>
> I am looking into a larger boat purchase and found a Beneteau 331 with
Volvo
> engine.
>
> I would be interested in hearing opinions about these engines especially
in
> Toronto area - availability of decent service, parts,
> etc.
>
> Will appreciate all opinions including remarks about
"cata-bene-huntalinas"
> :)
>
>
> Marek
>
> C&C 24 "Emilie"
>
> Hamilton Harbour, ON
>
>

-- 
Sent from my mobile device

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

 

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com <http://www.cncphotoalbum.com/> 
CnC-List@cnc-list.com

 

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to