Hi Damien, my Viking brethren! I agree with the Edson advice. Now we've both lost steering too!
Danny From my Android phone -------- Original message -------- From: Jim Watts <paradigmat...@gmail.com> Date: 06/21/2013 1:44 PM (GMT-05:00) To: 1 CnC List <cnc-list@cnc-list.com> Subject: Re: Stus-List Cast aluminum jiggy thing for cable steering Are you talking about the quadrant? If so, give Edson a call, they will have what you need. Know what diameter rudder post you have before you call them... On 21 June 2013 10:08, Damien Morrissey <morrissey.dam...@gmail.com> wrote: Last night as I was motoring to my dock space after putting up my mast, i noticed my wheel steering was WAY too loose. I was lucky enough to be able to DRIFT correctly into my slip without any steering correction (since that would have been impossible). I have a 1974 Ontario Viking (33 foot) - C&C design. Upon investigation at lunch time today I found that the Cast Aluminum thing that attaches and guides the pedestal steering cables had snapped into two pieces and is no longer attached to the steering shaft. Does anyone on the list know where such a beast can be found or what I can call it when I call to inquire. Thanks in advance for the help - this list is GREAT ! Damien "Melissa Anne" Corner Brook, NL, Canada _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
