Sailing in and around Halifax is awesome. You can have the world as your destination if you have time. There are many little islands and coves to anchor in and there are 5 clubs in Halifax to choose your racing from. There is a Metro circuit if you want to race most weekends. Cruising down to Chester is about a day's sail. Tidal range in and around Halifax is about 6 feet. Lots to do and see. There is a cruising guide available at "the Binnacle" ca.binnacle.com to get an idea of cruising around here.
I moved back from Ottawa, and enjoying life here on the "Right" coast and am really enjoying the sailing here in Halifax area. Of course, I've always been used to tides as I grew up here and have a cottage on the Bay of Fundy where I have 43 feet of tide at 12 knots or so... -- Cheers, Jeff Nelson Muir Caileag C&C 30 Armdale Yacht Club On 05/22/13, Stevan Plavsa <stevanpla...@gmail.com> wrote: > Hey Bob, question for you from a Torontonian that's getting tired of this > city .. what's the sailing like out in Halifax? I'm sure it's a lot more > interesting than Lake Ontario but coming from a lake I've never dealt with > tides and currents. Is the sailing very challenging out there? Do you haul > your boat over winter? > > I work at OCAD University and I check the job postings at NSCAD pretty often. > Nothing yet but I want to stay in higher ed, particularly art & design and > Halifax is very appealing. In fact, the east coast in general is very > appealing! > > > Steve > Suhana, C&C 32 > Toronto > > > > > > On Wed, May 15, 2013 at 10:54 AM, Stevan Plavsa <stevanpla...@gmail.com> > wrote: > > > > Thanks Bob. That certainly explains the fitting/tube thingy on the floor of > > the vee birth. > > > > Steve > > Suhana, C&C 32 > > Toronto > > > > > > > > > > On Wed, May 15, 2013 at 10:48 AM, Robert Abbott <robertabb...@eastlink.ca> > > wrote: > > > > > Steve: > > > > > > > > > > > > Mine is hull #277....the baby stay is on a tunrbuckle connected to the > > > deck.....there is a 'SS rod' that runs from the deck to the floor > > > connection in the vee birth that supports the upwards pull of the baby > > > stay. > > > > > > > > > A few of the 32 owners here have simply taken their baby stay off the > > > boat(s). Since Rob Ball designed it there, I have left mine on. It does > > > make tacking a little more cumbersome. > > > > > > > > > > > > Bob Abbott > > > > > > AZURA > > > > > > C&C 32 - 84 > > > > > > Halifax, NS > > > > > > > > > > > > > > > > > > On 2013/05/15 11:32 AM, Stevan Plavsa wrote: > > > > > > > > > > Thanks all. I figured I'de be ok but your feedback leaves me with some > > > > peace of mind and that'll make the job, any job, easier. > > > > > > > > Bob, no baby stay on mine . weird eh? I know the 32 had one, mine > > > > doesn't. > > > > > > > > However mine does have a weird metal tube thingy on the floor of the > > > > vee birth .. right by the door. The surveyor guessed that it might have > > > > had something to do with a baby stay though there is no evidence on > > > > deck of there ever being one. Is your baby stay just connected to a > > > > fitting on deck? I'm hull number 59 so I figure by then they would have > > > > settled on how they were building these but i guess not. > > > > > > > > > > > > Steve > > > > > > > > Suhana, C&C 32 > > > > > > > > Toronto > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com