You may be right, Dwight, but someone knowledgable should troubleshoot it 
properly. 

Rich Knowles
Indigo. LF38
Halifax

On 2013-04-06, at 21:51, dwight veinot <dwightvei...@hfx.eastlink.ca> wrote:

Rich
 
I think that is good advice but would it not be reasonable to suspect something 
simple like the oil pressure sensor is causing the alarm
 
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
 
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Knowles Rich
Sent: April 6, 2013 9:18 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar panel problem ...
 
I strongly suggest your friend get someone familiar with things electrical to 
check out his boat. There are simply too many possibilities to discuss them 
sensibly here. 

Rich Knowles
Indigo. LF38
Halifax

On 2013-04-06, at 20:45, David Paine <paineda...@gmail.com> wrote:

Folks,
 
My friend, Steve, messed up this afternoon working on his cb C&C 35.  He is too 
shy to post (kidding) but here (below) is his question.  I am an A4 guy so I am 
clueless about what dangers the Yanmar horn that sounds when starting a Yanmar 
is even  supposed to alert one to!    Here is the question ...
 
Hi David - 

I have a question for you ... this morning, while installing the boat 
batteries, I installed the big (engine) battery then proceeded to cross the 
wires on the second (house) battery ... resulting in a pretty spectacular 
spark.   

After the spark I noticed two other things - 


1)  the first battery was making pulsing noises that sounded like it might be 
shorting out internally - I disconnected it and, when it was tested later, the 
battery was dead ... it was actually having charging issues last summer so I 
guess the arcing did it in (?) 

2) when I had the battery switch "on" (to any position - "all", "both", "#1" 
and "#2") the Yanmar engine start panel was making the same steady tone it 
makes when starting the engine ... for this, I tried replacing the ignition 
switch but that didn't correct the problem ... it still whines on all battery 
positions except for "off" 

... do you have any ideas (or ideas where I could get some ideas)?? 

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2240 / Virus Database: 2641/5728 - Release Date: 04/06/13
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to