I ended up sticking with what I know and used Epiphanes Gloss on the cabin sole.
*A tip for sanding large areas of varnish; especially fairly new varnish: Sprinkle the area with talcum powder; it helps keep your sandpaper from clogging.* Andy C&C 40 Peregrine On Tue, Mar 19, 2013 at 4:31 PM, Bill Coleman <colt...@verizon.net> wrote: > The local shipwright has been using Minwax Polyurethane, and likes the > results over the years. I bought the helmsman interior/Exterior satin for > down below, but my buddy has been using the straight polyurethane on his > sole, see**** > > > http://www.personal.psu.edu/faculty/d/r/drf6/Liberty_Project_1/MS_Hatches.htm > **** > > I would not second guess him, his boats are always spectacular when he is > done. The indoor/outdoor has some softening agents, but they don’t think > they are needed down below. I will use the straight poly on the floors.*** > * > > ** ** > > Bill Coleman**** > > C&C 39 [image: animated_favicon1]**** > > ** ** > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gary > Russell > *Sent:* Tuesday, March 19, 2013 3:51 PM > > *To:* C&C List > *Subject:* Re: Stus-List Interior Varnish**** > > ** ** > > Thanks, Dwight, but I'm looking for interior varnishing.**** > > Gary**** > > On Tue, Mar 19, 2013 at 3:44 PM, Gary Russell <captnga...@gmail.com> > wrote:**** > > I am about to refinish the teak on the interior of Expresso. The > question is, what varnish should I use ( Satin, gloss, Epiphanes, MinWax, > etc)?. All suggestions appreciated.**** > > ** ** > > Gary**** > > S/V Expresso**** > > '75 C&C 35 Mk II**** > > East Greenwich, RI, USA > **** > > ** ** > > ~~~~~~~_/)~~~~~~**** > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com**** > > > > **** > > ** ** > > -- > ~~~~~~~_/)~~~~~~**** > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
<<image001.gif>>
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
