Looks great. Nice work:) Rich Knowles INDIGO LF38 Halifax, NS.
On 2013-03-06, at 3:48 PM, Harry Hallgring <hhallgr...@icloud.com> wrote: 1. prep/sand boat and plexi. 2. Sika prime both surfaces 3. apply tape to boat on inboard edge of opening 4. mask everything 5. lay bead of sealant on boat 6. set ports 7. finish sealant 8. remove tape when tacky I don't use clamps or braces, although it wouldn't hurt. The tape holds it in place (approx 1/16" bedding). Ports completed two seasons on MIRAGE without incident. I have done other frameless surface mounted ports on my J Boat the same way and it lasts. Sika is good stuff. Harry Hallgring hhallgr...@icloud.com On Mar 06, 2013, at 02:05 PM, Knowles Rich <r...@sailpower.ca> wrote: > So Harry, just to confirm, the windows are secured in the cabin top by just > the 3M tape and then they are caulked with Sika 395. No fasteners whatsoever > and no major installation bracing or clamping? How long have they been in > place? > > Rich Knowles > INDIGO LF38 > Halifax, NS. > > > > > > On 2013-03-06, at 3:00 PM, Harry Hallgring <hhallgr...@icloud.com> wrote: > > Portlight Replacement Pictures > > Harry > MIRAGE > > On Mar 06, 2013, at 12:27 PM, Harry Hallgring <hhallgr...@icloud.com> wrote: > >> Jonathan, >> The tape is not as wide as the bed, leaving a void for sealant which does >> fill any irregularities. >> >> Harry >> >> Sent from my iPhone > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
