I went w 1/2" ply boo. Looks great. Carbonized. Got tired of dealing w veneered wood.
Bill C C 34 1982. "Panacea" Sent from my iPad On Oct 4, 2012, at 4:32 PM, BRUCE BOLTON <bruce.bol...@shaw.ca> wrote: > I completed this on Apple Tree about five years ago ... memory is a bit foggy > but I think you can do it with two sheets. You need to "spline" the section > by the galley to get the correct width as it is over 4 feet wide there. I > first did a rough cut (within say a half inch) with a jig saw, then used a > router with the original boards as the guide and got a real close fit. I also > go rid of some goofy small bits of floor boards. The main salon area is now > two large pieces with two "hatches" to get into the bilge. One piece for the > gallery area, one piece for the small area by the head, and finally a small > one in the v-berth. I also went with cup washers around the perimter. > > Bruce > S/V Apple Tree > 35-3 > > ----- Original Message ----- > From: "Indigo" <ind...@thethomsons.us> > To: cnc-list@cnc-list.com > Sent: Thursday, October 4, 2012 2:37:44 PM > Subject: Stus-List Teak and Holly for C&C 35MKIII > > > > > > I am getting mentally prepared to tackle replacement of the cabin sole on > Indigo. Can anyone with a 35MKIII that has done this, please advise how many > sheets of 8’ x 4’ I will need so that the holly lines will line up? > > > > Jonathan > > Indigo C&C35MKIII > > > > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
