Hi Jim
Mine came with a set of 4x 6 volt batteries, but they are smaller than
the T-105 form factor, an inch less height. BCI group 2 I believe. I
think you will have problems with the height, I'd make a cardboard
mockup before committing the $$. Note though, mine are in a 2x2
arrangement, with the long axis of the batteries running fore-aft. Mine
sit on a tray that is mounted to a plywood platform glassed into the
bottom of the compartment.
It _might_ be possible to make a row of the four, with the battery long
axis port-stbd, as that would let them sit a bit deeper. Please let me
know what you conclude as mine are getting old and I'll be headed down
this road in the near future.
Graham Collins
Secret Plans
C&C 35-III #11
Jim Watts wrote:
After 6 years, my last set of batteries is looking close to the end. I
would like to replace the 3 group 27's I have now with 4 T-105
batteries, but I don't know if I have the space. I'm going out to
measure the spaces and trial fit a cardboard mockup, but maybe I can
save some time by asking here...just maybe someone has done it already.
Between the forward compartment and the aft compartment under the
q-berth, is there room to mount 4 T-105's? I also have a group 24
starting battery, but I can stash that almost anywhere.
--
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
