Thanks guys i have got installed now i have edited my sendmail.mc with the extra bits, after editing clamav.conf and trying to start it i get this
/usr/local/sbin/clamav-milter -blo /var/run/clmilter.sock ERROR: Please edit the example config file /usr/local/etc/clamav.conf. /usr/local/sbin/clamav-milter: Can't parse the config file /usr/local/etc/clamav.conf What is causing that ? Thank you Sarky ----- Original Message ----- From: "Neil Vince" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, February 01, 2004 7:56 PM Subject: Re: [Clamav-users] Compiling with --enable-milter > I had this same problem. Not sure what the proper way to do this us > but: if edit clamav-milter Makefile (in the sub dir) search for and > replace the string "../docs/clamav-milter.8" with > "../docs/man/clamav-milter.8" then it will make and install (assuming > sendmail-devel is installed). > > One other gotcha I found is when adding the input filter defs. to > sendmail.mc remember to rebuild the sendmail.cf using m4 with the flag > -D_FFR_MILTER otherwise the milter hooks will not be added to > sendmail.cf > > Regards, > > Neil Vince > Nevis Systems Limited > http://www.world-text.com > Internet SMS Email and SMPP Gateway Solutions > > > > On Sun, 2004-02-01 at 17:55, sarky wrote: > > clamav-0.65.tar.gz on RH9.0 > > ----- Original Message ----- > > From: Phil.W > > To: [EMAIL PROTECTED] > > Sent: Sunday, February 01, 2004 6:50 PM > > Subject: Re: [Clamav-users] Compiling with --enable-milter > > > > What distribution are you using, the FC1 ones work fine here > > with Sendmail > > ----- Original Message ----- > > From: sarky > > To: [EMAIL PROTECTED] > > Sent: Sunday, February 01, 2004 5:35 PM > > Subject: [Clamav-users] Compiling with --enable-milter > > > > Hello all > > > > I am trying to get it to work on my sendmail, i have > > removed the RPMS first and installed sendmail with > > milter on and it still gave the same problem so i just > > decided to put the RPMS back and install again but > > still the same problem does anyone know out there what > > to do ..? > > > > I am using the latest version > > > > Thank you > > Sarky > > > > /bin/sh ../libtool --mode=link gcc -g -O2 -o > > clamav-milter clamav-milter.o ../clamd/cfgfile.o > > ../clamd/others.o ../clamscan/getopt.o -L../libclamav > > -L/usr/lib/libmilter -lmilter -lpthread > > gcc -g -O2 -o clamav-milter clamav-milter.o > > ../clamd/cfgfile.o ../clamd/others.o > > ../clamscan/getopt.o -L/root/clamav-0.65/libclamav > > -L/usr/lib/libmilter -lmilter -lpthread > > make[1]: *** No rule to make target > > `../docs/clamav-milter.8', needed by `all-am'. Stop. > > make[1]: Leaving directory > > `/root/clamav-0.65/clamav-milter' > > make: *** [all-recursive] Error 1 > > > > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > Clamav-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/clamav-users > ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Clamav-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/clamav-users
