OK, maybe I am just losing my mind, but the more I look at information on the ASR's the more confusing it gets, what happened to the good old 6500/7600 days..
We are a small shop, but have multiple transit points as well as peerings at Equinix, so need a router that will happily talk BGP all day. I was looking at picking up an ASR1006/RP2 from someone, but wanted to make sure it would all work, and the more I look at the licensing, the more confused I get, and no I can't honestly afford to run out and buy a new one. I was going to pick up a handful of SIP40's and 10GE ports to tie it to our upstream's and internal network.
Now here is where it gets confusing for me, and I don't want to spend a pile of money on a new router just to find out it was wasted and won't work. I see talk of perpetual licenses, flex licenses, honor licenses, and the latest I found was something about macsec licenses per port. I am really looking for simple, I want to configure the box, put it in service, and just have it work, without having to worry about phone home's, renewal fees and anything else that can sneak up and bite me.
I did want redundancy like we had in our old 7600's, so why I figured the ASR1006 might be a good fit, with hardware redundancy, and supporting a lot more routes, plus it seems from what I have read that IOS-XE is very much like IOS which I am quite used to at this time. If anyone has any suggestions, or can share any experiences, so I don't waste good money on something useless it would sure be appreciated..
---
Howard Leadmon PBW Communications, LLC http://www.pbwcomm.com _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
