My wrong about CFCs -----Original Message----- From: Gert Doering [mailto:[email protected]] Sent: Wednesday, July 30, 2014 4:23 PM To: Dimitris Befas Cc: Jiri Prochazka; <[email protected]> Subject: Re: [c-nsp] DFC3C-XL refuses to operate in XL mode
Hi, On Wed, Jul 30, 2014 at 03:47:03PM +0300, Dimitris Befas wrote: > Remove the cfc modules from the chassis. No matter if they are admin shut. CFC and DFC can coexist without any problem. Documented *and* works in practice. Only mixing DFC/PFC and DFC/PFC-XL causes problems, so this hardware config is weird indeed - "show modules" is all good, it really should work. gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [email protected] fax: +49-89-35655025 [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
