On 10/04/2014 21:11, Alejandro Aristizabal wrote: > I got an interface Bundle with 2 memebers, interfaces Gi0/0/0/18 and > Gi0/0/0/19 (each one has two fiber cords, rx and tx), one fiber cord (tx) > got damaged on interface Gi0/0/0/19 but this interface was still in UP UP > state, the bundle still used this interface for traffic sending. ¿if one > cord got damaged why the interface was still in UP UP state... How can I > make if this happen again, the interface Gi0/0/0/19 goes down ?
sounds like XR on asr9k. If this is correct and you're running ip on the bundle interface, you may also want to consider bfd on the bundle member links: > http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-3/routing/configuration/guide/b_routing_cg43xasr9k/b_routing_cg43xasr9k_chapter_011.html#d115799e3688a1635 Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
