On Mon, Feb 17, 2014 at 6:37 PM, Lee <[email protected]> wrote: .... > The impression I got was that the memory doesn't die until the device > is power cycled. > Is that incorrect?
For *this particular issue* the reported failure mode occurs only at power cycle. Which suggests (but this is just conjecture) that the failing component is possibly the eeprom (on the memory device) which stores the spd data. Without spd data, it is not possible to detect/configure the memory. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
