On 29/11/13 15:09, Nikolay Shopik wrote: >>>> c7201(config-if)#ip flow monitor IPv4 sampler SM input >>>> ^ >>>> % Invalid input detected at '^' marker. >> Try this: >> >> c7201(config-if)#ip flow monitor IPv4 sampler ? >> >> or >> >> c7201(config-if)#ip flow monitor IPv4 ? >> >> and see what options it gives. > > c7201(config-if)#ip flow monitor IPv4 ? > input Apply Flow Monitor on input traffic > multicast Apply Flow Monitor on multicast traffic > output Apply Flow Monitor on output traffic > sampler Optional Sampler to apply to this Flow Monitor > unicast Apply Flow Monitor on unicast traffic > > c7201(config-if)#ipv6 flow monitor IPv4 sampler ? > % Unrecognized command > > Even tried just "ip flow monitor IPv4 sampler" still Unrecognized command
For sake of archives. "ip flow monitor IPv4 sampler `name of sampler`" command failing on interface, because on CPU based router you have to use command "sampler" to define sampler configuration and if there aren't any it will produce "% Unrecognized command" "flow-sampler-map" is only apply to hardware routing platforms. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
