On 29/11/13 14:59, Dobbins, Roland wrote: > Any NetFlow, sampled or non-sampled. > > Set the active timer to 60s, and the inactive timer to 5s.
Even when you draw graph in 5 min interval? As lowering values means more flows exported per min so more load. > >> > c7201(config-if)#ip flow monitor IPv4 sampler SM input >> > ^ >> > % Invalid input detected at '^' marker. > Try this: > > c7201(config-if)#ip flow monitor IPv4 sampler ? > > or > > c7201(config-if)#ip flow monitor IPv4 ? > > and see what options it gives. c7201(config-if)#ip flow monitor IPv4 ? input Apply Flow Monitor on input traffic multicast Apply Flow Monitor on multicast traffic output Apply Flow Monitor on output traffic sampler Optional Sampler to apply to this Flow Monitor unicast Apply Flow Monitor on unicast traffic c7201(config-if)#ipv6 flow monitor IPv4 sampler ? % Unrecognized command Even tried just "ip flow monitor IPv4 sampler" still Unrecognized command _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
