Hi Alan, It makes sense. If you want to move ut from the global config to the switch progile you can import it there. Importing it only moves it from one internal database to the other, so it shouldn't impact the working of the switch.
Met vriendelijke groet, Sander Steffann Op 26 jun. 2013 om 10:56 heeft Alan Hall <[email protected]> het volgende geschreven: > Hi Sander, > > thanks for the reply. Based on the information you provided, I was able to > check if a particular port channel interface was part of the global (conf t) > configuration or the switch-profile (configure sync) configuration. The > particular por tchannel only turns up int eh global db (show system internal > csm info global-db seq-tbl | include <interface>), os it looks like it's not > configured under the switch profile! > > Make sense to you? > > thanks again. > > > On 25 June 2013 16:15, Sander Steffann <[email protected]> wrote: >> Hi, >> >> > Is there any way to confirm that an interface is part of a switch profile >> > in NX-OS (version 5) other than running a "show running-config >> > switch-profile | include <interface name>" or a "show running-config >> > switch-profile"? >> >> You can look at: >> show system internal csm info switch-profile cfgd-db seq-tbl >> and: >> show system internal csm info global-db seq-tbl >> >> If you're asking this because of strange problems when committing: I have >> seen cases where the switch's internal state as shown with these commands >> was inconsistent with "show running-config switch-profile", so it might be >> worth wile to compare them. >> >> Cheers, >> Sander > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
