Hi Sander, thanks for the reply. Based on the information you provided, I was able to check if a particular port channel interface was part of the global (conf t) configuration or the switch-profile (configure sync) configuration. The particular por tchannel only turns up int eh global db (show system internal csm info global-db seq-tbl | include <interface>), os it looks like it's not configured under the switch profile!
Make sense to you? thanks again. On 25 June 2013 16:15, Sander Steffann <[email protected]> wrote: > Hi, > > > Is there any way to confirm that an interface is part of a switch profile > > in NX-OS (version 5) other than running a "show running-config > > switch-profile | include <interface name>" or a "show running-config > > switch-profile"? > > You can look at: > show system internal csm info switch-profile cfgd-db seq-tbl > and: > show system internal csm info global-db seq-tbl > > If you're asking this because of strange problems when committing: I have > seen cases where the switch's internal state as shown with these commands > was inconsistent with "show running-config switch-profile", so it might be > worth wile to compare them. > > Cheers, > Sander > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
