Service unsupported-transceiver Not
Service-unsupported transceiver And it's a hidden command, it won't show up in the ? :) Ken Matlock Network Analyst Exempla Healthcare (303) 467-4671 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dennis Sent: Monday, May 23, 2011 2:15 PM To: [email protected] Subject: [c-nsp] Fwd: GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification check failed for GBIC in port [dec] I'm out of my element at this point - does anyone else have any suggestions? ---------- Forwarded message ---------- From: Farooq Razzaque <[email protected]> Date: Mon, May 23, 2011 at 1:05 PM Subject: RE: [c-nsp] GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification check failed for GBIC in port [dec] To: [email protected] Dear Dennis I tried the following command but this command is not support. can u please check again and let me know service-unsupported transceiver > Date: Mon, 23 May 2011 09:31:58 -0700 > Subject: Re: [c-nsp] GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification check > failed for GBIC in port [dec] > From: [email protected] > To: [email protected] > > On Mon, May 23, 2011 at 9:30 AM, Farooq Razzaque <[email protected]> > wrote: > > Dear Dennis > > > > Is there need to upgrade the IOS ? > > I don't know for sure. Are you using Cisco SFPs? What IOS is it? > > > > > > service-unsupported transceiver > > > > Do i need to put the following commands as well or only the above command > > will be sufficient. > > Just try the above if that doesn't work put in the below commands as well. > > > > > no errdisable detect cause gbic-invalid > > errdisable recovery cause all > > errdisable recovery interval 30 > > > > Thanks, > > Dennis O. > > > > > > > > > > > > > > > > > > > > > >> Date: Mon, 23 May 2011 09:27:51 -0700 > >> Subject: Re: [c-nsp] GBIC_SECURITY_CRYPT-4-ID_MISMATCH: Identification > >> check failed for GBIC in port [dec] > >> From: [email protected] > >> To: [email protected] > >> > >> On Mon, May 23, 2011 at 9:26 AM, Farooq Razzaque <[email protected]> > >> wrote: > >> > Dear Dannis > >> > > >> > Thanks for your reply > >> > > >> > Is there any need to upgrade the IOS ? > >> > > >> > Are the following commands will be put on the GBIC interface > >> > >> Just do it in global config mode. > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ *** Exempla Confidentiality Notice *** The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any other dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify me immediately by replying to the message and deleting it from your computer. Thank you. *** Exempla Confidentiality Notice *** _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
