Did it work on SCOS 3.5.5 or only in 3.6?
On 22 April 2010 17:16, Ruslan Pustovoytov <[email protected]
<mailto:[email protected]>> wrote:
Yes.
Did anyone try 2 SCME-E modules in one cassis with new software?
On 22 April 2010 15:41, Ruslan Pustovoytov <[email protected]
<mailto:[email protected]> <mailto:[email protected]
<mailto:[email protected]>>> wrote:
We test this release in production from 20 april.
I see that bypass do not work if I take out any optics
from SIP.
It work only when I reload SCE or take out SIP from chassis.
But I have no big experience with SCE.
Did anybody try this release in production?
2010/4/17 Yann Gauteron <[email protected]
<mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>
3.6 is out since Tuesday this week :-)
2010/3/18 Mikhail Schedrin <[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>>
Sorry that I didn't answer so much time.
As I got to know from cisco engineers 2 SCMs are
supported only by
software
3.6 that hasn't released yet.
I did open TAC case, they don't know that 2
SCMs are
not suported by
3.5.5.
They also do not have 2 SCMs in a lab to test it :(
On 3 March 2010 19:17, Ghattas Jacob
<[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>> wrote:
Mikhail,
Be sure both sce have the same pkg installed
before you insert the
second
one to the sce.
Which version are you running as it should
be 3.6
and higher...
Jacob
On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner
(avayner) <
[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>>wrote:
Mikhail,
I recommend you open a TAC case, as
this could
be a hardware problem,
but it requires some debugging...
Arie
-----Original Message-----
From: [email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
[mailto:[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>] On
Behalf Of Mikhail
Schedrin
Sent: Wednesday, March 03, 2010 11:46
To: [email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
Subject: [c-nsp] SCE 8000 with 2*SCM-E
Hi.
Does anybody have the experince of using
SCE8000 with two SCM-E
modules?
We
got the second SCM-E couple of days ago and
SCE always boots in
recovery
mode, when I install the second module.
I could not find any documentation about
installing and configuring the
second SCM-E, I think it should work out of
the box. Actually it does
not.
_______________________________________________
cisco-nsp mailing list
[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list
[email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
http://puck.nether.net/pipermail/cisco-nsp/
--
С уважением,
Щедрин Михаил
Начальник отдела ТП2
SkyNet Telecom http://sknt.ru
Санкт-Петербург
тел. +7 812 600-75-35 ext. 554
моб. +7 911 934-79-83
_______________________________________________
cisco-nsp mailing list
[email protected] <mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
<mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
С уважением,
Щедрин Михаил
Начальник отдела ТП2
SkyNet Telecom http://sknt.ru
Санкт-Петербург
тел. +7 812 600-75-35 ext. 554
моб. +7 911 934-79-83
_______________________________________________
cisco-nsp mailing list [email protected]
<mailto:[email protected]>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
С уважением,
Щедрин Михаил
