Did it work on SCOS 3.5.5 or only in 3.6? On 22 April 2010 17:16, Ruslan Pustovoytov <[email protected]> wrote:
> Yes. > >> Did anyone try 2 SCME-E modules in one cassis with new software? >> On 22 April 2010 15:41, Ruslan Pustovoytov <[email protected] <mailto: >> [email protected]>> wrote: >> >> We test this release in production from 20 april. >> I see that bypass do not work if I take out any optics from SIP. >> It work only when I reload SCE or take out SIP from chassis. >> But I have no big experience with SCE. >> >> >> >> Did anybody try this release in production? >> >> 2010/4/17 Yann Gauteron <[email protected] >> <mailto:[email protected]>> >> >> >> >> 3.6 is out since Tuesday this week :-) >> >> 2010/3/18 Mikhail Schedrin <[email protected] >> <mailto:[email protected]>> >> >> >> Sorry that I didn't answer so much time. >> >> As I got to know from cisco engineers 2 SCMs are >> supported only by >> software >> 3.6 that hasn't released yet. >> I did open TAC case, they don't know that 2 SCMs are >> not suported by >> 3.5.5. >> They also do not have 2 SCMs in a lab to test it :( >> >> On 3 March 2010 19:17, Ghattas Jacob >> <[email protected] <mailto:[email protected]>> wrote: >> >> >> Mikhail, >> Be sure both sce have the same pkg installed >> before you insert the >> >> second >> >> one to the sce. >> Which version are you running as it should be 3.6 >> and higher... >> >> Jacob >> >> >> On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner >> (avayner) < >> >> [email protected] <mailto:[email protected]>>wrote: >> >> >> Mikhail, >> >> I recommend you open a TAC case, as this could >> be a hardware problem, >> but it requires some debugging... >> >> Arie >> >> -----Original Message----- >> From: [email protected] >> <mailto:[email protected]> >> [mailto:[email protected] >> <mailto:[email protected]>] On >> Behalf Of Mikhail >> >> Schedrin >> >> Sent: Wednesday, March 03, 2010 11:46 >> To: [email protected] >> <mailto:[email protected]> >> >> Subject: [c-nsp] SCE 8000 with 2*SCM-E >> >> Hi. >> Does anybody have the experince of using >> SCE8000 with two SCM-E >> >> modules? >> >> We >> got the second SCM-E couple of days ago and >> SCE always boots in >> >> recovery >> >> mode, when I install the second module. >> I could not find any documentation about >> installing and configuring the >> second SCM-E, I think it should work out of >> the box. Actually it does >> not. >> _______________________________________________ >> cisco-nsp mailing list >> [email protected] >> <mailto:[email protected]> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at >> http://puck.nether.net/pipermail/cisco-nsp/ >> >> _______________________________________________ >> cisco-nsp mailing list >> [email protected] >> <mailto:[email protected]> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at >> http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> >> -- >> С уважением, >> Щедрин Михаил >> Начальник отдела ТП2 >> SkyNet Telecom http://sknt.ru >> Санкт-Петербург >> тел. +7 812 600-75-35 ext. 554 >> моб. +7 911 934-79-83 >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> <mailto:[email protected]> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> >> >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> <mailto:[email protected]> >> >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> >> >> >> -- >> С уважением, >> Щедрин Михаил >> Начальник отдела ТП2 >> SkyNet Telecom http://sknt.ru >> Санкт-Петербург >> тел. +7 812 600-75-35 ext. 554 >> моб. +7 911 934-79-83 >> > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- С уважением, Щедрин Михаил _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
