only 3.6. On 4/22/10, Mikhail Schedrin <[email protected]> wrote: > Did it work on SCOS 3.5.5 or only in 3.6? > > On 22 April 2010 17:16, Ruslan Pustovoytov <[email protected]> wrote: > >> Yes. >> >>> Did anyone try 2 SCME-E modules in one cassis with new software? >>> On 22 April 2010 15:41, Ruslan Pustovoytov <[email protected] <mailto: >>> [email protected]>> wrote: >>> >>> We test this release in production from 20 april. >>> I see that bypass do not work if I take out any optics from SIP. >>> It work only when I reload SCE or take out SIP from chassis. >>> But I have no big experience with SCE. >>> >>> >>> >>> Did anybody try this release in production? >>> >>> 2010/4/17 Yann Gauteron <[email protected] >>> <mailto:[email protected]>> >>> >>> >>> >>> 3.6 is out since Tuesday this week :-) >>> >>> 2010/3/18 Mikhail Schedrin <[email protected] >>> <mailto:[email protected]>> >>> >>> >>> Sorry that I didn't answer so much time. >>> >>> As I got to know from cisco engineers 2 SCMs are >>> supported only by >>> software >>> 3.6 that hasn't released yet. >>> I did open TAC case, they don't know that 2 SCMs are >>> not suported by >>> 3.5.5. >>> They also do not have 2 SCMs in a lab to test it :( >>> >>> On 3 March 2010 19:17, Ghattas Jacob >>> <[email protected] <mailto:[email protected]>> wrote: >>> >>> >>> Mikhail, >>> Be sure both sce have the same pkg installed >>> before you insert the >>> >>> second >>> >>> one to the sce. >>> Which version are you running as it should be 3.6 >>> and higher... >>> >>> Jacob >>> >>> >>> On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner >>> (avayner) < >>> >>> [email protected] <mailto:[email protected]>>wrote: >>> >>> >>> Mikhail, >>> >>> I recommend you open a TAC case, as this could >>> be a hardware problem, >>> but it requires some debugging... >>> >>> Arie >>> >>> -----Original Message----- >>> From: [email protected] >>> <mailto:[email protected]> >>> [mailto:[email protected] >>> <mailto:[email protected]>] On >>> Behalf Of Mikhail >>> >>> Schedrin >>> >>> Sent: Wednesday, March 03, 2010 11:46 >>> To: [email protected] >>> <mailto:[email protected]> >>> >>> Subject: [c-nsp] SCE 8000 with 2*SCM-E >>> >>> Hi. >>> Does anybody have the experince of using >>> SCE8000 with two SCM-E >>> >>> modules? >>> >>> We >>> got the second SCM-E couple of days ago and >>> SCE always boots in >>> >>> recovery >>> >>> mode, when I install the second module. >>> I could not find any documentation about >>> installing and configuring the >>> second SCM-E, I think it should work out of >>> the box. Actually it does >>> not. >>> _______________________________________________ >>> cisco-nsp mailing list >>> [email protected] >>> <mailto:[email protected]> >>> >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at >>> http://puck.nether.net/pipermail/cisco-nsp/ >>> >>> _______________________________________________ >>> cisco-nsp mailing list >>> [email protected] >>> <mailto:[email protected]> >>> >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at >>> http://puck.nether.net/pipermail/cisco-nsp/ >>> >>> >>> >>> -- >>> С уважением, >>> Щедрин Михаил >>> Начальник отдела ТП2 >>> SkyNet Telecom http://sknt.ru >>> Санкт-Петербург >>> тел. +7 812 600-75-35 ext. 554 >>> моб. +7 911 934-79-83 >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> <mailto:[email protected]> >>> >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> <mailto:[email protected]> >>> >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>> >>> >>> >>> >>> -- >>> С уважением, >>> Щедрин Михаил >>> Начальник отдела ТП2 >>> SkyNet Telecom http://sknt.ru >>> Санкт-Петербург >>> тел. +7 812 600-75-35 ext. 554 >>> моб. +7 911 934-79-83 >>> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > > > -- > С уважением, > Щедрин Михаил > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
