The PA-FE is Wellington recognized if I recall correctly...
I'll try it again and see just to be sure.
Y.
Le 8 mars 2010 à 18:39, "Buhrmaster, Gary" <[email protected]> a
écrit :
When PA-FE1 is in slot1, the router loops during boot and the
following
appears :
Have you tried booting, and then plugging a PA-FE into
slot 1? The diagnostics *might* be better when running
the full IOS.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
