I don't have a FTM-3100 and am not a developer. Looking in the browser tab root -> memory[199][0-13] -> unknown5 = 0x0 -> unknown 6 = 0x0 and root -> memory[199][14-198] -> unknown5 = 0x3 -> unknown6 = 0x1
It also looks like Chirp has not implemented programming the priority channel. Looks like a bug report may be in order. On 8/6/23 20:40, Andy Zaayenga via chirp_users wrote: > Hi folks, > > I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to > run with CHIRP. I downloaded the radio using the FTM-3200D R template as > per the CHIRP home page. Downloading and uploading works fine. > > I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor > that are covered by the FTM-3100R. Uploading those to the radio works fine > and downloading shows them all in memory. > > However, I notice that when I scan all 63 frequencies the radio only scans > the first 14. The display just stops on the 14th location while the numbers > under MR keep counting up to 63. Then it cycles back to location 1. I have > the radios side by side and the FT-60R scans all the locations while the > FTM-3100R only the first 14. > > The specs say the radio has 199 memory locations which is consistent with > the CHIRP img > * 199 "basic" memory channels, numbered "1" through "199". > > But the CHIRP image doesn't show the home channel or any of the L or U > locations. > * A "Home" channel, providing storage and quick recall of one prime > frequency. > * 10 sets of band-edge memories, also known as "Programmable Memory Scan" > channels, labeled "L0/U0" through "L9/U9". > > Does anyone out there have an FTM-3100R and can let me know if I'm doing > something wrong? I'm wondering if there's some issue with the FTM-3200D R > template WRT the FTM-3100R. > > Thanks from a first-time poster! > > 73 > Andy Zaayenga > KD2SME > Yaesu FT-60R, Yaesu FTM-3100R > > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Paul AC0HY at ac...@wpmills.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-ow...@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com -- /************************************************** * Amateur Radio Station AC0HY * * W. Paul Mills SN807 * * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS * * President Kaw Valley Amateur Radio Club * **************************************************/ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
