Sorry, Dick. That file is my CHIRP file, and I renamed it with a bak extension because most servers do not allow img files due to security protocol. As Danny points out, you can delete the .bak part to make it an img file that can be read into CHIRP.
Tonight I installed the CHIRP Legacy edition and went through the same exercise. No difference from the current version. The operative question is – Does anyone on this list use CHIRP successfully for their Yaesu FTM-3100R? Then I would know if it’s something about my configuration or CHIRP itself. Thanks all. Andy From: Danny Siminiuk <da...@siminiuk.com> Sent: Monday, August 7, 2023 5:22 PM To: chirp users <chirp_users@intrepid.danplanet.com> Cc: peter.fontneau <peter.fontn...@icloud.com>; Andy Zaayenga <a...@zaayenga.net> Subject: Re: [chirp_users] FTM-3100R "I’ve attached the img file, renamed to a bak extension" Rename <https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=133513&part=2> Yaesu_FTM-3100R.img.bak to <https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=133513&part=2> Yaesu_FTM-3100R.img Get it? _____ From: "w4rss" <w4...@radioclub.org <mailto:w4...@radioclub.org> > To: "peter.fontneau" <peter.fontn...@icloud.com <mailto:peter.fontn...@icloud.com> >, "chirp users" <chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >, "Andy Zaayenga" <a...@zaayenga.net <mailto:a...@zaayenga.net> > Sent: Monday, August 7, 2023 4:18:25 PM Subject: Re: [chirp_users] FTM-3100R Andy, that img.bak file will not open on my tablet. I get a message that .bak files are not recognized. Dick On Aug 7, 2023 at 2:12 PM, Andy Zaayenga via chirp_users <chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > wrote: Thanks Peter. None of the locations are marked Skip. For reference, I’ve attached the img file, renamed to a bak extension so the servers don’t block it. The Skip field only accepts S (Skip) or blank, there is no dropdown for Priority. The manual references that there is only one Priority channel, kept in memory location 0. No memory location 0 shows in the CHIRP file. 73 Andy From: peter.fontn...@icloud.com <mailto:peter.fontn...@icloud.com> <peter.fontn...@icloud.com <mailto:peter.fontn...@icloud.com> > Sent: Monday, August 7, 2023 12:58 PM To: Andy Zaayenga <a...@zaayenga.net <mailto:a...@zaayenga.net> >; chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> Subject: Re: [chirp_users] FTM-3100R Check to see if you have something entered in the Skip column of Chirp. https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns Skip The scan skip mode for the channel. The values and their meanings are: * S: Skip this channel during scan * P: This channel is a priority On Aug 6, 2023, at 9:40 PM, Andy Zaayenga via chirp_users <chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > wrote: Hi folks, I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to run with CHIRP. I downloaded the radio using the FTM-3200D R template as per the CHIRP home page. Downloading and uploading works fine. I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor that are covered by the FTM-3100R. Uploading those to the radio works fine and downloading shows them all in memory. However, I notice that when I scan all 63 frequencies the radio only scans the first 14. The display just stops on the 14th location while the numbers under MR keep counting up to 63. Then it cycles back to location 1. I have the radios side by side and the FT-60R scans all the locations while the FTM-3100R only the first 14. The specs say the radio has 199 memory locations which is consistent with the CHIRP img * 199 "basic" memory channels, numbered "1" through "199". But the CHIRP image doesn't show the home channel or any of the L or U locations. * A "Home" channel, providing storage and quick recall of one prime frequency. * 10 sets of band-edge memories, also known as "Programmable Memory Scan" channels, labeled "L0/U0" through "L9/U9". Does anyone out there have an FTM-3100R and can let me know if I'm doing something wrong? I'm wondering if there's some issue with the FTM-3200D R template WRT the FTM-3100R. Thanks from a first-time poster! 73 Andy Zaayenga KD2SME Yaesu FT-60R, Yaesu FTM-3100R <Yaesu_FTM-3100R_2023-08-06.csv>_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Pete at peter.ja...@icloud.com <mailto:peter.ja...@icloud.com> To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com <mailto:chirp_users-unsubscr...@intrepid.danplanet.com> To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com <mailto:chirp_users-ow...@intrepid.danplanet.com> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dick Smith at w4...@radioclub.org <mailto:w4...@radioclub.org> To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Danny at k...@hamoperator.org <mailto:k...@hamoperator.org> To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com <mailto:chirp_users-unsubscr...@intrepid.danplanet.com> To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com <mailto:chirp_users-ow...@intrepid.danplanet.com> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
