My friend had his radio programmed for him by somebody else that he can't contact for help. I'm glad I reached out to the CHIRP community. I feel like I have a few things to try, whereas before I was definitely lost.
Jonas ________________________________ From: chirp_users-boun...@intrepid.danplanet.com <chirp_users-boun...@intrepid.danplanet.com> on behalf of Jim Unroe <rock.un...@gmail.com> Sent: January 5, 2020 1:44 PM To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com> Subject: Re: [chirp_users] Programming Troubles On Sun, Jan 5, 2020 at 11:55 AM Jonas Haiduk <jhai...@hotmail.com> wrote: > > My friend gave me a spreadsheet of frequencies programmed into his radio, > which included the following > > > > I can hear him through my radio, but I cannot send to him so that he can hear > me. Attached is a screenshot of what I attempted in CHIRP. I have a feeling > the problem I am experiencing is due to the Channel Spacing column from his > spreadsheet, which I'm not sure how to deal with in CHIRP > > I have a BAOFENG A-58 and am using CHIRP for Mac. > > Thanks in advance for any help! > > Jonas Hi Jonas, You friend probably made a mistake on the information that he sent you. It is unusual to not program an encodde (TX) CTCSS tone without a matching decode (RX) CTCSS tone on simplex. What I would do is program 2 channels and upload them to your radio... Channel 1: Tone Mode = Tone | Tone = 131.8 Channel 2: Tone Mode = TSQL | ToneSql = 131.8 Try them both. Keep the one that works. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to jhai...@hotmail.com at jhai...@hotmail.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
