"It won’t change IF you can hear the other or not" A loud signal at the microphone of a transmitter set for "wideband FM" (25kHz) should cause RF deviations "out of band" as far as a NFM receiver is concerned. Speaking softly into the mic should be heard just fine up to a point.
Tony ________________________________ From: chirp_users-boun...@intrepid.danplanet.com <chirp_users-boun...@intrepid.danplanet.com> on behalf of Jardy via chirp_users <chirp_users@intrepid.danplanet.com> Sent: Sunday, January 5, 2020 1:05:04 PM To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com> Subject: Re: [chirp_users] Programming Troubles The only thing that is going to change when you go from FM to NFM is the voices will sound ‘funny’. It won’t change IF you can hear the other or not. As pointed out before, check your tone or DCS settings. Jardy Dawson WA7JRD Message sent from some electronic device that only the Manufacturer of said device really cares about. On Jan 5, 2020, at 10:51, Tony Fuller <goldstar...@hotmail.com> wrote: I believe that a channel spacing of 12.5kHz corresponds to narrow band fm, or NFM in a lot of chirp drivers. See if changing the mode from FM to NFM helps -- hopefully that is an option. Tony ________________________________ From: chirp_users-boun...@intrepid.danplanet.com <chirp_users-boun...@intrepid.danplanet.com> on behalf of Jonas Haiduk <jhai...@hotmail.com> Sent: Sunday, January 5, 2020 10:52:35 AM To: chirp_users@intrepid.danplanet.com <chirp_users@intrepid.danplanet.com> Subject: [chirp_users] Programming Troubles My friend gave me a spreadsheet of frequencies programmed into his radio, which included the following <image.png> <image.png> I can hear him through my radio, but I cannot send to him so that he can hear me. Attached is a screenshot of what I attempted in CHIRP. I have a feeling the problem I am experiencing is due to the Channel Spacing column from his spreadsheet, which I'm not sure how to deal with in CHIRP I have a BAOFENG A-58 and am using CHIRP for Mac. Thanks in advance for any help! Jonas _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jard...@yahoo.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
