Channel spacing is irrelevent. He cant hear you because you have CTCSS encode on and he DOES NOT have CTCSS decode on. You both need either encode AND decode ON or both OFF.
> On 05 January 2020 at 11:52 Jonas Haiduk <jhai...@hotmail.com> wrote: > > My friend gave me a spreadsheet of frequencies programmed into his radio, > which included the following > > > > I can hear him through my radio, but I cannot send to him so that he can > hear me. Attached is a screenshot of what I attempted in CHIRP. I have a > feeling the problem I am experiencing is due to the Channel Spacing column > from his spreadsheet, which I'm not sure how to deal with in CHIRP > > I have a BAOFENG A-58 and am using CHIRP for Mac. > > Thanks in advance for any help! > > Jonas > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at ni...@ngunn.net > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail ni...@ngunn.net www http://www.ngunn.net
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
