I just learned what SQE does. I had to enable it on my AUI and it seems the collision detection is happy now.
-Peter On Thu, Dec 19, 2024 at 9:41 AM Peter Ekstrom <epekst...@gmail.com> wrote: > Hi all, > > This may be a dumb question but I am a bit stumped. I can't seem to find > any helpful info in the manuals. I have a DEQNA installed in my 11/23+ and > I have run a NETGEN using the QNA driver. When NETINS runs I start seeing > messages like these on the console: > > Event type 5.14, Send failed > Occurred 19-DEC-24 09:30:11 on node 10.1 (TYCHO) > Line QNA-0 > Failure reason = Collision detect check failed > > So obviously the link isn't working, but I find nothing helpful about > where to start looking regarding the failed collision detect check. The > line is on: > > NCP>show line qna-0 status > > Line status as of 19-DEC-24 09:36:31 > > Line State > > QNA-0 On > > I have an Ethernet transceiver (I have 2 and have tried both, they worked > last time I used them) connected to the DEQNA harness, and a cable > connecting it to an old 10Base-T hub. I know that hub works because I have > a couple of other systems (OS/2 laptop and an AS/400) connected to it. > > So does anyone have any ideas of where I can start? > > Thanks in advance! > Peter >
