I have an 11/03 and could do a screen share and run your script. Contact me off-list or on the ccmp discord.
-Eric On Thu, Mar 23, 2023 at 9:21 AM jos.fries--- via cctalk < cctalk@classiccmp.org> wrote: > For my LSI-11 simulator I developed an as accurate as possible > implementation of the Console-ODT functionality as described in the "LSI11 > PDP11/03 Processor Handbook" and the "Microcomputer and Memories Handbook". > As might be expected from these handbooks, the description of the ODT > functionality is not a complete specification and consequently during the > development several questions arose on the reaction of ODT on the user > input, such as: > > - What is the reaction on commands like "R0/<CR>RS/4@"? Will the last > opened > location be opened or the contents of the last opened location? > - What is the reaction on a RUBOUT at the prompt? > - What will be the value of the opened location when e.g. three digits are > entered and these three digits are then rubbed out and the location is > closed? Will the value of the last opened location be unchanged or will it > be zero? > - An address and a GO command can be separated by a semicolon. What is the > reaction if characters other than the "G" are typed after the semicolon? > - Etc., etc... > > Is there someone in (the vicinity of) the Netherlands with a functioning > LSI-11 who would allow me to try out these commands or could anyone point > me > to someone who could facilitate that? > > I developed a complete test script for all LSI-11 ODT commands and "all" > relevant situations and ideally I would like to carry out this test script > to get a complete specification of the Console-ODT functionality. > > Regards, > > Jos > >
