I'd start with version 6 on an 11/34 first unless you are sure you have have the required hardware for
There are a few disk pack images out there but not many, you might have to start with what you can find B On Fri, Jul 29, 2022, 11:35 PM Chris Zach via cctalk <cctalk@classiccmp.org> wrote: > 7m was the Bell Labs unix that came after v6. I've got the disks > somewhere around here, are there other copies out there? > > CZ > > On 7/29/2022 10:52 PM, devin davison wrote: > > Thank you for the suggestion, but what is 7m? i have done a few seacches > > but not turned up much. > > > > Sounds promising, if i can find install media ill give it a try in simh. > > > > Thanks, > > > > Devin D. > > > > > > > > > > On Fri, Jul 29, 2022, 10:53 AM Chris Zach via cctalk > > <cctalk@classiccmp.org <mailto:cctalk@classiccmp.org>> wrote: > > > > I know you can run 7m as I have a couple of RL01 packs with 7m on > them. > > You needed two drives. > > > > RSX11/M 4.2 would probably be the best OS for a 34. > > > > On 7/26/2022 11:52 PM, devin davison via cctalk wrote: > > > Hello, > > > > > > Been a while since i last posted here. > > > > > > I have a few pdp 11/34 systems. The drives i am using are RL02 > > drives. > > > > > > Is it possible to install Ultrix on a 34? I have been testing out > > Ultrix in > > > the simh emulator. I see during the install the 34 mentioned as a > > > recognized cpu type, but later in the install the system hangs. > > This hang > > > does not occur if i emulate a later cpu system like the 11/83. > > > > > > Not sure if ultrix can be installed due to the memory limitation, > > if not, > > > rsx will be my second choice. > > > > > > Hoping to have some real hardware running soon! > > > > > > Thanks, > > > > > > Devin D. > > >
