Much appriciated, i will check 7m out now. Thanks for the link to the files.
--Devin D. On Fri, Jul 29, 2022, 11:41 PM Warner Losh <i...@bsdimp.com> wrote: > > > On Fri, Jul 29, 2022, 8:58 PM devin davison via cctalk < > cctalk@classiccmp.org> wrote: > >> Thank you for the suggestion, but what is 7m? i have done a few seacches >> but not turned up much. >> > > DEC fixed a few bugs in V7 and expanded hardware support and called it 7m. > > Sounds promising, if i can find install media ill give it a try in simh. >> > > https://www.tuhs.org/Archive/Distributions/DEC/Jean_Huens_v7m/ > > Warner > > Thanks, >> >> Devin D. >> >> >> >> >> On Fri, Jul 29, 2022, 10:53 AM Chris Zach via cctalk < >> cctalk@classiccmp.org> >> wrote: >> >> > I know you can run 7m as I have a couple of RL01 packs with 7m on them. >> > You needed two drives. >> > >> > RSX11/M 4.2 would probably be the best OS for a 34. >> > >> > On 7/26/2022 11:52 PM, devin davison via cctalk wrote: >> > > Hello, >> > > >> > > Been a while since i last posted here. >> > > >> > > I have a few pdp 11/34 systems. The drives i am using are RL02 drives. >> > > >> > > Is it possible to install Ultrix on a 34? I have been testing out >> Ultrix >> > in >> > > the simh emulator. I see during the install the 34 mentioned as a >> > > recognized cpu type, but later in the install the system hangs. This >> hang >> > > does not occur if i emulate a later cpu system like the 11/83. >> > > >> > > Not sure if ultrix can be installed due to the memory limitation, if >> not, >> > > rsx will be my second choice. >> > > >> > > Hoping to have some real hardware running soon! >> > > >> > > Thanks, >> > > >> > > Devin D. >> > >> >
