> On Apr 18, 2021, at 7:40 PM, Noel Chiappa <j...@mercury.lcs.mit.edu> wrote: > There's an intermediate 10" or so high adapter piece (one either side, of > course) mounted to the KY11-L... on the bottom, a single 1" or so machine > screw (#8, I think) goes through the vertical tab on the side at the front of > the BA11, to a tapped hole in the adapter piece.
Thanks for the details, Noel! Pictures of my brackets should be viewable at https://photos.app.goo.gl/wni3mDAQHozK9Ho27 The interesting/confusing bit for me is the bottom part... In the second picture you can see that my brackets just have a punched oval hole at the bottom, and not a "tapped hole" per your description above. The tabs on the chassis to which these brackets mount all have #10 press fit threaded bushings. The bit at the top, with the plastic pieces (called out on the parts lists as "latch, molding") and countersunk #10 screws is clear, and looks like what you describe. > I'll take a look. I'm too burned out (COVID long haul) at the moment to take > pictures or do a drawing right at the moment; if needed, I can do it tomorrow > (or so). Something a lot of us are going to have to face in the upcoming months/years, it seems -- wishing you best! > PS: A while back you were after measurements on the KY11-L power knob; > did you ever get those: If not, I've got one, and can measure it. I did not get exact measurements, however, I did find this part: https://www.millsupply.com/knob-fan-speed-grumman-olson-53777.php?p=324629 ...which turns out to be a very suitable replacement: bezel diameter and post height are just right, marking lines up nicely with the panel, good feel and very sturdy. cheers, --FritzM.
