On 1/27/2019 9:07 PM, Jay Jaeger via cctech wrote: > > Let me know what you want me to scan - should be able to get to it later > this week. > > JRJ > > > On 1/27/2019 6:40 PM, Fritz Mueller via cctalk wrote: >> Those reading through the recent "PDP-11/45 RSTS/E boot problem" thread here >> will know that I've gotten to some corners of my 11/45 CPU now that don't >> match up with the commonly available engineering drawings. >> >> My /45 is an early serial number (#152). So far I've verified hardware >> differences on at least my M8100 and M8105 cards and spares, relating to >> parity error abort handling. I would really like to track down any of the >> following resources: >> >> - PDP 11/45 system engineering drawings *earlier* than those currently >> available on bitsavers (Jun '74) >> >> - Any PDP 11/45 backplane wire list (what looks to be a wire list in the >> currently available engineering drawings is actually only a breakdown of the >> power harness.) >> >> - PDP 11/45 ECO information, particularly the following: >>
The first batch of scanning is done. 600dpi, CCITT Group 4 except for the cover pages which are LZW. You will find them in my Google Drive at https://drive.google.com/open?id=0B2v4WRwISEQRWWFFdVpCZWFTZEU In subfolder pdf/dec/pdp11/1145 Note that the FP11-B material is already on bitsavers (this is generally where I put my contributions for them to snag...) Memories (and perhaps FP11-C) tomorrow, I hope, then on to the manuals that Noel suggested.
