On Sep 10, 2018, at 12:18, Al Kossow wrote:
> As sad as it sounds, I'm thinking now it may make sense to gut the 
> electronics and just use the case, lcd
> and kb to make a dumb terminal. At least then you don't have to screw around 
> with serial dongles.

This makes me wonder how much serial dongle you’re willing to screw around with.

2001’s Toshiba laptop with Windows Me (Harder) came with no serial ports except 
the USB kind (in spite of the specifications given on the seller’s web page).  
It did have two PCMCIA slots in which I installed PCMCIA serial cards.  Yes, 
two, I sometimes used it as a pass-through monitor for SLIP/PPP traffic.

I like the HP 200LX for portable serial terminal purposes, and have never 
stretched the built-in Datacomm app’s VT100 emulation to the point of noticing 
incorrect emulation.  But it meant having to carry at least the peculiar cable 
that brought its port out to DE9S (suitable for connection to PC/AT serial 
port), and probably a couple DE9P-to-DB25 adapters (for “printer” and “modem”), 
and maybe a breakout box too.

I liked the 100LX too.  Similar hardware and software.  I cannot recall any 
improvements to the Datacomm app in the 200LX.

The 95LX has two problems.  It’s basically a three-wire serial interface with 
no hardware flow control.  And it is designed to run on battery power, and it 
shows sometimes.  I had trouble getting it to work with a Telebit Qblazer (also 
battery-powered) until I got out the soldering iron and made up a single 
adapter to go between the two instead of a chain or two or three adapters.  One 
side or the other or maybe both just didn’t have enough oomph to punch through 
all those connectors.

-Frank McConnell




Reply via email to