Yes before the screen would stay dark until you powered off, then there would be a brief flood. Now it floods and stays on but no text.
From: Ian Finder [mailto:ian.fin...@gmail.com] Sent: Tuesday, October 3, 2017 9:39 AM To: Brad H <vintagecompu...@bettercomputing.net>; General Discussion: On-Topic and Off-Topic Posts <cctalk@classiccmp.org> Subject: Re: Tek 4051 semi-repaired Does it warm up or flood? "When I got my 4051, on power up there would be no voltage to the motherboard and nothing came up on the screen. That has been fixed, however we still do not have any kind of prompt or anything appearing." Care to share with the class what you've done so far? On Tue, Oct 3, 2017 at 9:29 AM, Brad H via cctalk <cctalk@classiccmp.org <mailto:cctalk@classiccmp.org> > wrote: Hi there, My go-to guy for CRT stuff has informed me that he has the CRT on my 4051 working and that the tube is good. When I got my 4051, on power up there would be no voltage to the motherboard and nothing came up on the screen. That has been fixed, however we still do not have any kind of prompt or anything appearing. Wondering if anyone has any ideas on where to go from here? I'm picking up the machine this week and will do some more testing.. hopefully the board didn't take any damage while he was working on the CRT. Brad -- Ian Finder (206) 395-MIPS ian.fin...@gmail.com <mailto:ian.fin...@gmail.com> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com
