I installed the RX01 Unibus adapter in slot 5
Then replaced the slot 5 NPG jumper (RX01 is not DMA) They are
underneath the motherboard on an 11/94
Next I connected up the RX01 and used original DEC RT-11 v5.4 RX01
distribution disks.
Then turned on and tried to boot DX.
Same result it says Trying.
If you have an 11/84 then whats on the KDJ-11 dialog screen would be
very interesting.
Which KDJ-11 do you have?
Can you get a picture of your console screen set up to boot from an
RX01 or RX01?
Rod
On 20/09/2017 13:47, Ulrich Tagge via cctalk wrote:
Hi Rod, > > I had an similar issue, when trying to boot a RX02 Disk created on
my > /84 on a /34a. Have bypassed this and have installed a fresh RT11,
> but had no time to figure out the problem. Would it of interest for >
you, to get RX02 Images (PDP11GUI) of my RT-11 V5.4 G Distribution >
Set? With them, you could install your /94 from scratch, ... . > > Many
Greetings > > Ulrich >
--
Wanted one pdp-8/i rocker switch leaver to copy.
02
