Glen Slick wrote:
> On Sat, Dec 3, 2016 at 12:13 PM, Holm Tiffe <h...@freibergnet.de> wrote:
> > Hi folks,
> >
> > I have an HP1631D Logic Analyzer for some years now und got an HP9121
> > dual Floppy drive that fits to it yesterday.
> > I've tested the drive, formating disks, storing and reading data ist
> > working :-)
> > While reading the Users Manual of the LA I've found out that besides of
> > storing setup- and configuration data on the disk, there should some
> > loadable disassemblers for the HP1631D exist on floppies..
> >
> > The Logic Analyzer is very limited from todays point of view but for
> > example an Z80 disassembler where nice to have.
> > Has someone out here such disassemblers (Z180, 8085, 8080, 6809 etc)
> > for the HP1631D?
>
> I have a 3.5-inch floppy part number 10342-13012 for the 10342B Bus
> Preprocessor (HP-IB, RS-232C/V.24, RS-449) for HP1630A/D/G and 1631A/D
> logic analyzers. I'll have to create an ImageDisk dump of that floppy.
>
> I also have a tape somewhere if I can find it that is probably for the
> either the 6800/6802 10307B (64672B) or 6809/6809E 10308B (64671A)
> preprocessor if I remember correctly. I don't have an 82161A HP-IL
> tape drive to try to read and dump that tape. If I find that tape I
> should send it to someone with a working 82161A HP-IL tape drive and
> the means to dump and archive that tape.
Interresting, I've don't even knew that such tape drives existed.
I'm interested in software for that thing, but it seems that I can't do
much to be helpful here.
I'll ask the friend from which I got the disk drive, maybe some tape
drive existis additinally? I've read on wikipedia that the Tapes are
HP-IL only but converters to HP-IB should exists..
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
i...@tsht.de Fax +49 3731 74200 Tel +49 3731 74222 Mobil: 0172 8790 741
