On Sat, Dec 3, 2016 at 12:13 PM, Holm Tiffe <h...@freibergnet.de> wrote: > Hi folks, > > I have an HP1631D Logic Analyzer for some years now und got an HP9121 > dual Floppy drive that fits to it yesterday. > I've tested the drive, formating disks, storing and reading data ist > working :-) > While reading the Users Manual of the LA I've found out that besides of > storing setup- and configuration data on the disk, there should some > loadable disassemblers for the HP1631D exist on floppies.. > > The Logic Analyzer is very limited from todays point of view but for > example an Z80 disassembler where nice to have. > Has someone out here such disassemblers (Z180, 8085, 8080, 6809 etc) > for the HP1631D?
I have a 3.5-inch floppy part number 10342-13012 for the 10342B Bus Preprocessor (HP-IB, RS-232C/V.24, RS-449) for HP1630A/D/G and 1631A/D logic analyzers. I'll have to create an ImageDisk dump of that floppy. I also have a tape somewhere if I can find it that is probably for the either the 6800/6802 10307B (64672B) or 6809/6809E 10308B (64671A) preprocessor if I remember correctly. I don't have an 82161A HP-IL tape drive to try to read and dump that tape. If I find that tape I should send it to someone with a working 82161A HP-IL tape drive and the means to dump and archive that tape.
