I have M8315s, M8316, M8317, M8357s (RX8-E), etc if anyone needs any to go with the boxes.
Paul On Sat, Mar 19, 2016 at 12:12 PM, Mattis Lind <mattisl...@gmail.com> wrote: > I saw that there were a post on PDP-8/a systems (and parts). > > I have a few 8A100 chassis. These are H9300 with a G8016 regulator board. > No CPU, no memory, no frontpanels. Just the H9300 chassis including the 10 > slot backplane, the 50Hz transformer assembly and the G8016 MOS memory > regulator. > > BTW. The backup batteries are probably not in good shape any longer. > Nothing is tested so capacitors etc might need checking. > > There are also some G8018 regulators, 50 Hz transformers for > 8A400/8A600/8A800 boxes, 50 Hz transformers for 8A420/8A620/8A820 boxes > (these are really very heavy). > > > Then there are two CDC / IMI floppy drives. BR8A5D. Single sided. 8 inch. > http://i.imgur.com/cMp76YA.jpg > http://i.imgur.com/EA91ayu.jpg > http://i.imgur.com/pWpmdX6.jpg > http://i.imgur.com/eP3m06n.jpg > > They are in the original box. Not sure if these are new or not. They look > fine. But haven't tested them. I might be able to test if there are > interest. > > Then two Tandon TM100-3 Single sided 80 tracks / 96 TPI drives. Tested > working. > http://i.imgur.com/UOnHNNI.jpg > http://i.imgur.com/F4ypilz.jpg > > We have one too many of TI SlientWriters. I have no picture of it > currently. But is som 7XX model I think. Printing on thermo paper. > Interest? > > We have a few DECprinter I aka LA180. A manual can be included as well... > > And since we got one LA30 working just fine, we don't need another one. > There is one DECwriter / LA30 available. It is complete but will probably > need care and attention to get working. > > Everything is located in Sweden so shipping can be rather expensive for > heavier items. > > Trade for something interesting... > > /Mattis >
