I saw that there were a post on PDP-8/a systems (and parts). I have a few 8A100 chassis. These are H9300 with a G8016 regulator board. No CPU, no memory, no frontpanels. Just the H9300 chassis including the 10 slot backplane, the 50Hz transformer assembly and the G8016 MOS memory regulator.
BTW. The backup batteries are probably not in good shape any longer. Nothing is tested so capacitors etc might need checking. There are also some G8018 regulators, 50 Hz transformers for 8A400/8A600/8A800 boxes, 50 Hz transformers for 8A420/8A620/8A820 boxes (these are really very heavy). Then there are two CDC / IMI floppy drives. BR8A5D. Single sided. 8 inch. http://i.imgur.com/cMp76YA.jpg http://i.imgur.com/EA91ayu.jpg http://i.imgur.com/pWpmdX6.jpg http://i.imgur.com/eP3m06n.jpg They are in the original box. Not sure if these are new or not. They look fine. But haven't tested them. I might be able to test if there are interest. Then two Tandon TM100-3 Single sided 80 tracks / 96 TPI drives. Tested working. http://i.imgur.com/UOnHNNI.jpg http://i.imgur.com/F4ypilz.jpg We have one too many of TI SlientWriters. I have no picture of it currently. But is som 7XX model I think. Printing on thermo paper. Interest? We have a few DECprinter I aka LA180. A manual can be included as well... And since we got one LA30 working just fine, we don't need another one. There is one DECwriter / LA30 available. It is complete but will probably need care and attention to get working. Everything is located in Sweden so shipping can be rather expensive for heavier items. Trade for something interesting... /Mattis
