On 2015-12-18 9:30 PM, Mike Ross wrote:
grrrr 3271 and 3272 controllers I should have said! They're much
dumber than 3174 - no program load device whatever; all done in
hardware. Just an on/off switch and a couple of status lights.
Mike
On Sat, Dec 19, 2015 at 2:27 PM, Mike Ross <tmfdm...@gmail.com> wrote:
Oh sounds like fun!
I'm working with 3277 which uses a different protocol; connects to
older mainframes (360/370) via 3171/3172 controllers - channel
attached or remote. Also connects to System/3 direct to the CPU
hardware as a console. I have a 3172 controller; physically rough and
needs restoration but *should* work if I can fake the remote
connection and modem - bisync etc. But just now I'm working with
Henk's 3277->RS232 converter - trying to get it hooked up to an
emulated System/3 - http://www.ibmsystem3.nl/emulators.html
I've played this game a lot - including telnetting into Linux from
3270 screens - see http://www.corestore.org/emuterm.htm
Please let me know when you manage to ship those 3174 diskettes to
Henk; I know he's keen to get them ASAP.
Mike
On Sat, Dec 19, 2015 at 12:00 PM, Guy Sotomayor <g...@shiresoft.com> wrote:
I’ve been tinkering around with my IBM Mainframe terminals and I’m pretty close
to having everything the way that I want it.
I currently have an IBM 3174-61R Establishment controller connecting to my
“mainframes” via TCP/IP. This allows me to not only connect to my Multiprise
3000 S/390 but also some PCs running Hercules to allow me to run older versions
of the mainframe OS’s. I currently have 3 IBM 3179 terminals hooked up.
I’ve upgraded the 3174 to be able to boot from a hard disk (it was a supported
option). I actually purchased the upgrade from a reputable vendor but after
many attempts we could not actually get it to do anything useful. I learned
about DavidG’s MFM emulator and that’s now installed in the 3174 which happily
boots from it. I still have to figure out a permanent mount for it since the
standard 3174 HDD mounts don’t work for the MFM emulator board.
One of the last things that I wanted to figure out was how to support multiple
sessions. I had configured the 3174 to support multiple sessions on each
terminal but following the documentation, I could never figure out how to
actually switch between the sessions. Well today I managed to do that.
Success! I finally figured out the key sequence for switching sessions. It
doesn’t match the IBM documentation. It’s not clear to me if that’s because I
haven’t configured something properly on the 3174 or if there’s some other
reason behind it.
Since I also have the AEA feature that allows me to connect ASCII terminals to
the 3174, my next project will be to hook up a couple of the terminals that’re
deemed “compatible” (VT100, ADM5 are on the list) and see how that works. But
that also involves navigating the 3174 configuration process which is opaque to
say the least (there are configuration screens but you need a manual because
the fields only have numbers (e.g. 721) to identify them and no other
indication as to how they need to be filled in).
Oh, the other bizarre thing about the 3174 that’s been configured with TCP/IP
is that I can also connect to “unix” servers with the 3174’s (and the ASCII
terminals too). It’ll be interesting to see how that works on a CUT mode
terminal. ;-)
TTFN - Guy
--
http://www.corestore.org
'No greater love hath a man than he lay down his life for his brother.
Not for millions, not for glory, not for fame.
For one person, in the dark, where no one will ever know or see.'
The 3272 is a channel attach controller the 3271 is the remote BSC (mods
1&2 )or SDLC (mods 11&12). I only recall seeing bisync ones, and 30+
years later I can still remember the bisync pollong sequence.
Paul.
