Hi, Thanks for the suggestion, does this also apply to using xia2dials within CCP4i2 on Windows? The GitHub link and XDSwiki only mention MacOS/Red Hat. As a possible workaround I might be able to get access to a Mac machine to test it on.
All the best, Irwin ________________________________ From: Marco Mazzorana <[email protected]> Sent: 22 December 2020 19:37 To: Irwin Selvam <[email protected]> Cc: [email protected] <[email protected]> Subject: Re: [ccp4bb] Reprocessing images collected on an Eiger2 detector using Xia2Dials on CCP4i2's GUI Dear Irwin, in addition to the very good suggestion by Dom, have you checked the Durin plugin for XDS is correctly installed and/or referenced when launching XDS? This is needed when working with HDF5 and NeXuS files generated from Eiger detectors at Diamond. The plugin and the basic reference are available at https://github.com/DiamondLightSource/durin Should you need further information on the processing and visualization of files from Eiger detectors, take a look at the online documentation at https://www.diamond.ac.uk/Instruments/Mx/I04/I04-Manual/Eiger2-Detectors.html Hope this helps, Best wishes Marco Il giorno mar 22 dic 2020 alle ore 17:04 Irwin Selvam <[email protected]<mailto:[email protected]>> ha scritto: Hi, I'd like to reprocess some data that were collected on an Eiger2 detector at Diamond with Xia2Dials using CCP4i2's GUI. I'm running CCP4i2 on a 64-bit Windows 10 machine. The data were processed successfully at Diamond with no obvious pathologies, the high resolution limit was just a little generous. The folder in question contains a Diamond specific file (.nsx extension), two image files (.h5), a header (.cbf), a master (.h5) and meta file (.h5). I've tried pointing Xia2 to the folder itself (which works when processing data collected on PILATUS detectors) and each of the files contained therein (except the Diamond specific file). Each time this results in the error " -ERROR- None:56 Error in wrapper xia2_dials 0.0:: External process exited with exit code != 0 Process: C:\CCP4-7\7.1\bin\xia2.bat -ERROR- None:47 Error in wrapper xia2_dials 0.0:: Error in checking external process after completion exit status and code: 0 1". I've attached the error, debug etc files for a representative 'run' to this email. Which files do I need to point xia2 towards to get it to run? Any help would be appreciated. All the best, Irwin ________________________________ To unsubscribe from the CCP4BB list, click the following link: https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCP4BB&A=1 ######################################################################## To unsubscribe from the CCP4BB list, click the following link: https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCP4BB&A=1 This message was issued to members of www.jiscmail.ac.uk/CCP4BB, a mailing list hosted by www.jiscmail.ac.uk, terms & conditions are available at https://www.jiscmail.ac.uk/policyandsecurity/
