Guys,
Ospf router IDs are local to the router. (My assumption).
However should there every be a scenario where the router ID learned under a
particular interface is not local to the router.
See below.
10.68.63.129 is from a connected router, but not the directly connected network.
router ospf 10
router-id 10.68.0.65
log-adjacency-changes
auto-cost reference-bandwidth 10000
redistribute static subnets route-map redis-statics-routemap
redistribute ospf 65485 subnets route-map NEON_TO_DCLAN
redistribute bgp 65399 subnets route-map ITC_DCLAN
network 10.68.0.65 0.0.0.0 area 0
network 10.68.63.80 0.0.0.3 area 0
network 10.68.63.88 0.0.0.3 area 0
network 10.68.63.96 0.0.0.3 area 0
network 10.68.63.100 0.0.0.3 area 0
network 10.68.63.104 0.0.0.3 area 0
network 10.68.63.137 0.0.0.0 area 0
network 10.68.191.106 0.0.0.0 area 0
distance 111
TenGigabitEthernet9/2.4002 is up, line protocol is up (connected)
Internet Address 10.68.63.137/30, Area 0
Process ID 10, Router ID 10.68.63.129, Network Type BROADCAST, Cost: 100
Transmit Delay is 1 sec, State BDR, Priority 1
Designated Router (ID) 10.68.128.1, Interface address 10.68.63.138
Backup Designated router (ID) 10.68.63.129, Interface address 10.68.63.137
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
TenGigabitEthernet8/2 is up, line protocol is up (connected)
Internet Address 10.68.191.106/30, Area 0
Process ID 10, Router ID 10.68.63.129, Network Type POINT_TO_POINT, Cost: 1
Transmit Delay is 1 sec, State POINT_TO_POINT
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Any ideas.
Regards
Rick
