I am currently running some technology labs on the SP POD and it seems that
the IOS used on R6 does not support (no error - some kind of IOS glitch)
this command under the ospf process - "default auto-cost reference-bandwidth
bandwidth"
a few examples -
R6(config-router)#default auto-cost reference-bandwidth 1000
R6(config-router)#do sh run | b router ospf
router ospf 1
log-adjacency-changes
area 69 virtual-link 200.0.0.9
network 150.50.69.6 0.0.0.0 area 69
network 150.50.100.6 0.0.0.0 area 0
network 200.0.0.6 0.0.0.0 area 0
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
!
!
!
!
!
!
!
control-plane
!
!
R6(config-router)#default auto-cost reference-bandwidth 10000
R6(config-router)#do sh run | b router ospf
router ospf 1
log-adjacency-changes
area 69 virtual-link 200.0.0.9
network 150.50.69.6 0.0.0.0 area 69
network 150.50.100.6 0.0.0.0 area 0
network 200.0.0.6 0.0.0.0 area 0
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
!
!
!
!
!
!
!
control-plane
!
!
R6(config-router)#do sh ip ospf int f0/0
FastEthernet0/0 is up, line protocol is up
Internet Address 150.50.7.6/25, Area 69
Process ID 1, Router ID 200.0.0.6, Network Type BROADCAST, Cost: 1
Enabled by interface config, including secondary ip addresses
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 200.0.0.6, Interface address 150.50.7.6
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Hello due in 00:00:02
Supports Link-local Signaling (LLS)
Cisco NSF helper support enabled
IETF NSF helper support enabled
Index 2/4, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
R6(config-router)#
R6#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(22)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 10-Oct-08 00:05 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
R6 uptime is 2 hours, 31 minutes
System returned to ROM by reload at 07:33:32 UTC Sun Feb 1 2009
System image file is "flash:c2800nm-adventerprisek9-mz.124-22.T.bin"
Anyone else noticed this?
It seems you can issue the command - but it does nothing.
I think it's the IOS - but maybe I am missing something
Any thoughts anyone?
Shai l.
