Recreate the DOCCD solutions to the best of your ability. 

Narbik also has free updates for his students, in which, OER is covered, along 
with EEM.

Regards,
Jay McMickle- CCIE #35355
Sent from iJay

On May 9, 2012, at 1:21 PM, Mohammad Paracha <[email protected]> wrote:

> 
> Jay,
> 
> Congratulations!!. Great work. I also notice that OER is not covered in 
> vendor workbooks. OER is one of the last topics to cover.
> What material you use for troubleshooting section. 
> 
> Thanks,
> 
> Muhammad P
> 
> ------------------------------
> On Tue, 8 May, 2012 11:44 PM EDT Jay McMickle wrote:
> 
>> Thanks:
>> I thank God.  This has been a dream of mine for 6 years, and he solely 
>> helped me attain this! I don’t want to start a religion roll as we are all 
>> from different parts of the word and have different religious backgrounds.  
>> However, give God a year of your faith and belief and see if things don’t 
>> change!
>> Secondly, my wife and family for dealing with me.  It’s been a constant 2 
>> years of knowing that I need to get home and lab.  I thank those that have 
>> helped me on the forums, and especially Narbik.  He gave me a personal 
>> relationship through my training, and even hung out with us until the wee 
>> morning hours during bootcamps to chat with us about anything and 
>> everything.  He really does care and it shows in his work.  Finally, I thank 
>> my employer.  Without their support, I would have had to quit my job to get 
>> this accomplished in 2 years.
>> 
>> Materials used:
>> Global Knowledge CIERS1 bootcamp
>> CCBootcamp MPLS for CCIE candidates (taken at Cisco LIVE)
>> INE (video only)
>> IPExpert Blended Learning Solution (Vol1 and 3 only, video on demand, audio 
>> on demand)
>> CCBootcamp ALM bootcamp
>> Narbik CIERS1 (attended twice) bootcamp, Advanced workbook, bootcamp 4.0 
>> workbook
>>  
>> Hardware used:
>> I was using 2800/3800/3560’s hardware cabled for each vendor.
>>  
>> Products that didn’t work:
>> CCBootcamp workbooks- I attended a CCB in September 2011.  The instructor 
>> (Rahim) was great and very knowledgeable.  I attended a bootcamp, but 
>> quickly cancelled on day 2 due to the workbooks alone.  There were so many 
>> typos, that even the instructor had to work through the workbooks to find 
>> that it mentions the wrong routers as part of the restrictions.  This made 
>> me start to doubt myself- not a good way to learn!  I’m sure the owner will 
>> come after me again for this posting, however, he did not follow up on his 
>> promise to rectify the situation (by receiving a beta version of the new 
>> workbooks) and I’m advising students away from your products as I said I 
>> would.  I have a few more examples of the bad business practices, but I will 
>> spare you those details.  WORST WORKBOOKS EVER!
>>  
>> Dates:
>> - April 30, 2010- Passed CCIE R&S Written
>>  
>> - May 3, 2010- Global Knowledge Bootcamp, CIERS1 (San Jose, California)
>>  
>> - July 2010- Passed CCIE Security written (Free test at Cisco LIVE)
>>  
>> - July 2010-Dec. 2011
>> I was averaging 15 hours a week of rack time over 4-5 days a week.  
>>  
>> - June 2011
>> I attended Narbik’s CIERS1 bootcamp.  WHOA.  That’s a lot to take in, but 
>> amazing training.  The man is a walking IOS dictionary and can rattle off 7 
>> levels deep of IOS commands.  I learned his theory (not verbatim) that if 
>> you need a sh run or to use a “?”, you aren’t ready for the lab.  I carried 
>> this with me throughout my studies after that.  Narbik taught me to look at 
>> the requirement or question, think about what technology is at hand, and if 
>> it’s a global, or interface command before starting in on a solution.  Great 
>> advice!
>>  
>> - Nov, 2011
>> I attended Narbik’s CIERS1 bootcamp for the second time. I was better 
>> prepared and did much better on my assessment labs.  I felt close to ready, 
>> but Narbik informed me that I wasn’t ready.  Yet, I still had to make my 
>> attempt at the Lab to qualify for the Lab Safe program.
>>  
>> - Dec. 13, 2011
>> My first attempt at the CCIE R&S lab.  I got a 50% (avg) on the config 
>> section, and an 18% on troubleshooting.  I didn’t expect to pass, but I was 
>> forced (so to speak) to take the lab by the end of the year to qualify for 
>> the “Lab Safe” program (free second attempt).
>> 
>> - Dec. 15- 2011
>> Kicked my labbing into high gear, and focused on the technologies I didn’t 
>> know well.  These were mainly IP Services.
>>  
>> - Dec. 20, 2011-March 20, 2012
>> Stepped up my lab times to 25 hours a week.  My method was this- Run through 
>> IPX VOL1 for the technologies I saw that I didn’t know well.  This was about 
>> 12 topics.  Run through IPX VOL3 Mock labs very slowly.  In fact, I 
>> sometimes took 16-20 hours for a Mock lab because I was looking them up on 
>> the DOCCD, and playing with different options to actually break the solution 
>> and finding a second solution as an alternative.  This was a key building 
>> block for me.  I want through Narbik’s Adv. workbooks and Bootcamp 4.0 
>> workbooks.  I especially liked Narbik’s workbooks for the reason for the 
>> solution.  If I didn’t know something in-depth, Narbik’s workbooks were my 
>> direct solution.  All of the vendors workbooks were still weak in IP 
>> Services, especially EEM an OER.  I know that Narbik, and I’m sure the other 
>> vendors will as well, have updates to their workbooks as this has been 
>> mentioned time and time again.  I believe Brain with INE
> has
>> committed to releasing something soon.
>>  
>> - March 20-April 30, 2012
>> Kicked my labbing into high gear.  My job allowed me to work from home, so I 
>> was averaging 30 hours a week (7 days a week) without any days off from 
>> labbing.  Those last 5 weeks were rough!  I was staying up late at night, 
>> drinking Monster energy drinks, and chasing them with Red Bull energy 
>> drinks!  Up until midnight/1am, and getting up at 6am, taking my girls to 
>> school, going to the gym, and then heading back to the house to lab/work.  
>> The last week before my lab, I actually took a week of vacation and turned 
>> off my email and didn’t answer my work phone except at breaks.
>>  
>> - May 1, 2012
>> Passed CCIE R&S Lab in San Jose!  Although they say to stop labbing and 
>> relax your mind, I don't work like that.  I labbed until midnight the night 
>> before the lab in my hotel, and labbed for an hour that morning.  This is 
>> partially because my mind was conditioned to do that (lab late), and I 
>> wanted my mind alert and fingers ready that morning for the lab.  I didn't 
>> feel it was proper to show up and not have the mentality for the wording of 
>> the lab.  *NOTE* You could have cut the tension with a knife in the waiting 
>> area prior to the lab at Cisco's San Jose's office.  I couldn't help but 
>> crack jokes!  Probably my way of dealing with nervous situations.  Also, it 
>> took 10 hours for my email that I passed!  AHHHHH!  Why was it that when I 
>> failed I knew in 2 hours?  Needless to say, I got zero sleep that night!
>> 
>> *My tips to success*
>> When you lab up, take your time to learn a technology.  When you learn it, 
>> go to a different vendor and work their technology based labs.  Go through 
>> them, fix it, and break it.  Get fancy with it and find another way to do it 
>> (because there is always another way and you might get a restriction that 
>> will throw you for a loop).
>>  
>> Preferred vendors (there is no single vendor), and why-
>> Narbik-Workbooks are in different degrees of difficulty, they build upon 
>> each other, and have a VERY detailed explanation to learn from.  After 
>> paying for his bootcamp and attending, you can re-take the bootcamps if 
>> seats are available for free.  With the amount of information delivered, I 
>> highly recommend taking it at least twice!
>>  
>> IPExpert- VERY hard, right out of the box!  But, their BLS has video’s that 
>> help understand how, but not why.  It’s up to you to learn the technology 
>> prior to working their labs.  The VOD is a “death by slideshow” that didn’t 
>> help me at all.  I did thoroughly enjoy their video on demand.  I have a 
>> lengthy drive to work each day, and these came in handy to some extent.  
>> But, once I found myself solid on a technology, and I was done with Narbik’s 
>> workbooks, this is where I went.  This is for the advanced student that 
>> feels they are ready, but in my opinion, not a learning tool.
>>  
>> INE- Their all access pass is great, and offers you discounted rates on 
>> their CCIE workbooks.  Their video’s are REALLY good.  For a lot of 
>> candidates, INE is a good choice as their hardware is 1800/2600 model 
>> routers and less of a financial impact.
>>  
>> Cisco 360- I don’t care for the workbooks, but their assessment labs are 
>> good to get a feel of the lab interface, and gives you an idea via a score 
>> of where you are.  If you can score high on these labs, you will do good on 
>> the labs.  But, I saw technologies on the lab that I did not get tested on 
>> within the Assessment labs.
>>  
>> I hope this helps you.  Now, onto CCIE Security!  Re-cabling my racks now 
>> for IPExpert and Narbik's layouts.  ;)  
>>  
>> God Bless.
>> 
>> Regards,
>> Jay McMickle- CCIE #35355
>>  
>> 
>> Regards,
>> Jay McMickle- CCIE #35355
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
>> 
>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to