EIGRP does not allow distances to be changed on a per-route basis for externals. You can use the 'distance eigrp...' command to change the AD of all external routes, but not the 'distance <ad>...' command to affect a subset of externals.
Bob -- Sent from my iPhone, please excuse any typos. On Apr 26, 2012, at 12:37 PM, Fulvio allegretti <[email protected]> wrote: > > I have noticed that the EIGRP distance command does not work on redistrubuted > routes, can anybody confirm this? > > I bumped into this by doing task3.7 of Vol 2 - Lab 8. The task is to create 3 > static routes to null 0 on R7 and advertise them in EIGRP on the LAN R5 - R6 > - R7. I decided to do this by redistributing the routes. The task also says > that R5 should know these routes with an Admin Distance of 95 whilst R6 with > an admin distance of 96. Did my access-list, my distance command, nothing, > admin distance 170. I took the redistribute off R7, did it with network > command under router eigrp and bang, distance changes on R5 and R6. I have > tested it a couple of times to convince myself. Has anybody seen this? Does > anyone have an explation? > Thanks > Fulvio > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
