Hi Fulvio, You can only change the distance of external commands as a whole, not individually using an ACL. The command syntax is as follows:
R4(config-router)#distance eigrp ? <1-255> Distance for internal routes R4(config-router)#distance eigrp 90 ? <1-255> Distance for external routes HTH. Jason On Thu, Apr 26, 2012 at 8:46 AM, Fulvio allegretti <[email protected]>wrote: > > I have noticed that the EIGRP distance command does not work on > redistrubuted routes, can anybody confirm this? > > I bumped into this by doing task3.7 of Vol 2 - Lab 8. The task is to > create 3 static routes to null 0 on R7 and advertise them in EIGRP on the > LAN R5 - R6 - R7. I decided to do this by redistributing the routes. The > task also says that R5 should know these routes with an Admin Distance of > 95 whilst R6 with an admin distance of 96. Did my access-list, my distance > command, nothing, admin distance 170. I took the redistribute off R7, did > it with network command under router eigrp and bang, distance changes on R5 > and R6. I have tested it a couple of times to convince myself. Has anybody > seen this? Does anyone have an explation? > Thanks > Fulvio > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
